Foundation Repair Before & After Photos

This Portland, ME, home was built on silty fill, and over the years, the home had settled, leading to the foundation cracking and allowing water to seep in. Needing to stabilize the foundation to prevent damage to their home, the homeowner booked a free estimate with TC Hafford Basement Systems. System Design Specialist Brian Donnolly worked with the homeowner to design a waterproofing and stabilizing system that would protect the health of the home and keep the family safe.

First Push Piers were installed to stabilize the foundation and prevent it from further settling, protecting the home from costly damage. The Push Pier system utilizes high-strength round steel tubes and brackets to lift sinking foundations. WaterGuard was installed to capture and channel water to the new UltraSump to keep the basement dry all of the time. The UltraSump pumps the water through an Exterior Buried Discharge line that takes the water away from the home. The system is protected against ice buildup during the winter with the installation of IceGuard. BrightWall was installed along the wall where cracks had previously formed to act as a vapor barrier and channel any moisture to the WaterGuard. Now the homeowner is able to enjoy their basement and use it for storage without moisture or water causing them issues, and they can live in their home without the concern of their foundation potentially failing.

After living with basement troubles for some time, this homeowner thought it was time they finally had something done about it. They contacted us at TC Hafford Basement Systems, and we got to work right away! The main problem concerning this homeowner was their cracking basement wall, which needed additional support. To protect this wall from further damage, nine-foot PowerBrace beams were installed against the surface of the wall, fastened to the floor and joists above the wall. These beams can be tightened over time to force the wall back into position and hold it there permanently. Lastly, to handle the moisture accumulation the homeowner reported, a SuperSump pump was installed in the natural low point of the floor. This will take in any water gathering in the basement and pump it out of the home through a discharge line protected by an IceGuard attachment on the exterior of the home. IceGuard pipe segments protect homes by allowing any water blocked by ice or debris to escape the sides of the line before backing up into the basement.

Now that their basement wall is secured and the moisture problem has been addressed, this homeowner no longer needs to worry about their basement sustaining any long-term damage.

Since purchasing the home four years ago, this Bowdoin, ME, homeowner wanted to address the issues with their foundation and prevent it from failing. System Design Specialist Todd Bernard worked with the homeowner to design a system that would reinforce the foundation wall and prevent any damage to the home. After collaborating, Todd created a system using PowerBrace to stabilize the wall. These steel I-beams will hold the wall in its current position without requiring immediate adjustment. Over time, the PowerBrace System can be tightened to straighten bowing or tilting walls. Now, the homeowner can use their basement for storage without worry, and the health of their home is protected.

We installed the SmartJack Support System to lift and level the sagging floors above the customer’s basement because the existing support was no longer doing its job. Over time, the floor had started to sag due to weakened or poorly installed supports, making the space less functional and safe. SmartJacks provide stable, adjustable support to restore the floor to its proper level and prevent further issues.

This Richmond, ME, homeowner was worried about the supports in his basement after seeing their dry wall beginning to crack. Not willing to let the problem get worse, they booked a free estimate with TC Hafford Basement Systems, and System Design Specialist Lou DiStasio worked with the homeowner to protect their home. A Supplemental Beam was built, and SmartJacks were installed where needed. SmartJacks are constructed of galvanized steel and can be adjusted over time to prevent the floor above from sagging. SmartJacks are a permanent solution to sagging and bouncy floors and can be installed in crawl spaces or basements. With the floor above stabilized and protected from sagging, the homeowner can live in their home confident that their floors are supported properly.